DS90UB929-Q1 Datasheet, PDF (55/71 Pages) Texas Instruments – 720p HDMI to FPD-Link III Bridge Serializer

www.ti.com
9 Application and Implementation
DS90UB929-Q1
SNLS457 – NOVEMBER 2014
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Applications Information
The DS90UB929-Q1, in conjunction with the DS90UB926Q-Q1/DS90UB928Q-Q1deserializer, is intended to
interface between a host (graphics processor) and a display, supporting 24-bit color depth (RGB888) and high
definition (720p) digital video format. It can receive an 8-bit RGB stream with a pixel clock rate up to 96 MHz
together with four I2S audio streams when paired with the DS90UB940-Q1/DS90UB948-Q1 deserializer.
9.2 Typical Applications
Bypass capacitors should be placed near the power supply pins. A capacitor and resistor are placed on the PDB
pin to delay the enabling of the device until power is stable. See below for typical STP and coax connection
diagrams.
Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DS90UB929-Q1
Submit Documentation Feedback
55