DS90UB929-Q1 Datasheet, PDF (53/71 Pages) Texas Instruments – 720p HDMI to FPD-Link III Bridge Serializer

www.ti.com
DS90UB929-Q1
SNLS457 – NOVEMBER 2014
Register Maps (continued)
ADD
(dec)
120
ADD
(hex)
0x78
Register Name
Slave Alias[2]
121
0x79 Slave Alias[3]
122
0x7A Slave Alias[4]
123
0x7B Slave Alias[5]
124
0x7C Slave Alias[6]
125
0x7D Slave Alias[7]
198
0xC6 ICR
Bit(s)
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
7
6
5
4
3
2
1
0
Table 8. Serial Control Bus Registers (continued)
Register
Type
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
(hex)
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Function
Description
Slave Alias ID 7-bit Slave Alias ID of the remote Slave 2 attached to the remote Deserializer. The
2
transaction will be remapped to the address specified in the Slave ID 2 register. A value
of 0 in this field disables access to the remote Slave 2.
Reserved.
Slave Alias ID 7-bit Slave Alias ID of the remote Slave 3 attached to the remote Deserializer. The
3
transaction will be remapped to the address specified in the Slave ID 3 register. A value
of 0 in this field disables access to the remote Slave 3.
Reserved.
Slave Alias ID 7-bit Slave Alias ID of the remote Slave 4 attached to the remote Deserializer. The
4
transaction will be remapped to the address specified in the Slave ID 4 register. A value
of 0 in this field disables access to the remote Slave 4.
Reserved.
Slave Alias ID 7-bit Slave Alias ID of the remote Slave 5 attached to the remote Deserializer. The
5
transaction will be remapped to the address specified in the Slave ID 5 register. A value
of 0 in this field disables access to the remote Slave 5.
Reserved.
Slave Alias ID 7-bit Slave Alias ID of the remote Slave 6 attached to the remote Deserializer. The
6
transaction will be remapped to the address specified in the Slave ID 6 register. A value
of 0 in this field disables access to the remote Slave 6.
Reserved.
Slave Alias ID 7-bit Slave Alias ID of the remote Slave 7 attached to the remote Deserializer. The
7
transaction will be remapped to the address specified in the Slave ID 7 register. A value
of 0 in this field disables access to the remote Slave 7.
Reserved.
IE_IND_ACC Interrupt on Indirect Access Complete: Enables interrupt on completion of Indirect
Register Access.
IE_RXDET_IN Interrupt on Receiver Detect: Enables interrupt on detection of a downstream Receiver.
T
IE_RX_INT
Interrupt on Receiver interrupt: Enables interrupt on indication from the Receiver. Allows
propagation of interrupts from downstream devices.
IE_LIST_RDY Interrupt on KSV List Ready: Enables interrupt on KSV List Ready.
IE_KSV_RDY Interrupt on KSV Ready: Enables interrupt on KSV Ready.
IE_AUTH_FAI Interrupt on Authentication Failure: Enables interrupt on authentication failure or loss of
L
authentication.
IE_AUTH_PAS Interrupt on Authentication Pass: Enables interrupt on successful completion of
S
authentication.
INT_EN
Global Interrupt Enable: Enables interrupt on the interrupt signal to the controller.
Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DS90UB929-Q1
Submit Documentation Feedback
53