TL16PC564BLVI_16 Datasheet, PDF (14/35 Pages) Texas Instruments – PCMCIA UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER

TL16PC564BLVI
Not Recommended For New Designs
PCMCIA UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER
SLLS627− SEPTEMBER 2004
standard voltage (5 V nominal)
MIN NOM MAX UNIT
Supply voltage, VCC
Input voltage, VI
High-level input voltage (CMOS), VIH
Low-level input voltage (CMOS), VIL
Output voltage, VO (see Note 4)
High-level output current, IOH
All outputs except RST, STSCHG, OUT1, OUT2 (see Note 5)
Low-level output current, IOL
All outputs except RST
RST
4.75
0
0.7 VCC
0
5 5.25
V
VCC
V
V
0.2 VCC V
VCC
V
4
mA
4
mA
8
Input transition time, tt
Operating free-air temperature range, TA
Junction temperature range, TJ (see Note 6)
0
25
ns
−40
25
85
°C
−40
25 115
°C
NOTES: 4. Applies for external output buffers
5. RST, STSCHG, OUT1, and OUT2 are open-drain outputs, so IOH does not apply.
6. These junction temperatures reflect simulation conditions. Absolute maximum junction temperature is 150°C. The customer is
responsible for verifying junction temperature.
electrical characteristics over recommended ranges of operating free-air temperature and supply
voltage (unless otherwise noted)
low voltage (3.3 V nominal)
PARAMETER
VOH
VOL
VIT ₊
VIT _−
Vhys
IOZ
IIL
IIH
High-level output voltage
Low-level output voltage
Positive-going input threshold voltage (see Note 7)
Negative-going input threshold voltage (see Note 7)
Hysteresis (VIT ₊ − VIT _−) (see Note 7)
3-state-output high-impedance current (see Note 8)
Low-level input current (see Note 9)
High-level input current (see Note 10)
TEST CONDITIONS
IOH = rated
IOL = rated
VI = VCC or GND
VI = GND
VI = VCC
MIN
VCC −0.55
0.3 VCC
0.1 VCC
MAX
0.5
0.7 VCC
0.3 VCC
± 10
−1
1
UNIT
V
V
V
V
V
µA
µA
µA
standard voltage (5 V nominal)
PARAMETER
TEST CONDITIONS
VOH High-level output voltage
IOH = rated
VOL Low-level output voltage
IOL = rated
VIT ₊ Positive-going input threshold voltage (see Note 7)
VIT _− Negative-going input threshold voltage (see Note 7)
Vhys Hysteresis (VIT ₊ − VIT _−) (see Note 7)
IOZ 3-state-output high-impedance current (see Note 8)
VI = VCC or GND
IIL
Low-level input current (see Note 9)
VI = GND
IIH High-level input current (see Note 10)
VI = VCC
NOTES: 7. Applies for external input and bidirectional buffers with hysteresis
8. The 3-state or open-drain output must be in the high-impedance state.
9. Specifications only apply with pullup terminator turned off.
10. Specifications only apply with pulldown terminator turned off.
MIN
VCC −0.8
0.2 VCC
0.1 VCC
MAX
0.5
0.7 VCC
0.3 VCC
± 10
−1
1
UNIT
V
V
V
V
V
µA
µA
µA
14
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265