CC2520_11 Datasheet, PDF (58/133 Pages) Texas Instruments – 2.4 GHZ IEEE 802.15.4/ZIGBEE RF TRANSCEIVER

CC2520 DATASHEET
2.4 GHZ IEEE 802.15.4/ZIGBEE® RF TRANSCEIVER
SWRS068 – DECEMBER 2007
1. Write 0x06 to EXCBINDX0. This will select SACKPEND as the bound instruction from Table 8: GPIO
configuration.
2. Write 0x89 to EXCBINDX1. Enables X-binding and selects RX_FRM_ACCEPTED as the bound
exception from Table 14: Exceptions summary.
Note
Be aware of the offset in numbering in the tables Exceptions summary (section 16) and GPIO configuration
(section 12.6) for exceptions.
It is for example possible to route the exception RF_IDLE to a GPIO pin in the GPIOCTRLn.CTRLn register
bit when the pin is set as output. In this case, the exception RF_IDLE has the numbering 0x01 in
accordance to Table 9: GPIO configuration
When RF_IDLE is to be bound with an instruction the numbering to be used in EXCBINDX/Y1 is 0x00 in
accordance to Table 14: Exceptions summary.
58
WWW.TI.COM