LM3S608-IQN50-C2T Datasheet, PDF (39/538 Pages) Texas Instruments – Stellaris LM3S608 Microcontroller

NRND: Not recommended for new designs.
Stellaris^® LM3S608 Microcontroller
1.4.7.2
1.4.8
outputs. The multiplexer is controlled by the Stellaris JTAG controller, which has comprehensive
programming for the ARM, Stellaris, and unimplemented JTAG instructions.
System Control and Clocks (see page 150)
System control determines the overall operation of the device. It provides information about the
device, controls the clocking of the device and individual peripherals, and handles reset detection
and reporting.
Hardware Details
Details on the pins and package can be found in the following sections:
■ “Pin Diagram” on page 487
■ “Signal Tables” on page 488
■ “Operating Characteristics” on page 495
■ “Electrical Characteristics” on page 496
■ “Package Information” on page 533
June 18, 2012
39
Texas Instruments-Production Data