409-10012 Datasheet, PDF (7/26 Pages) TE Connectivity Ltd – AMP-O-MATIC Side-Feed Stripper-Crimper

Applicator Ram
Assembly
Ram Post
Pads
Applicator Ram
409-10012
Wire Disc
Insulation Disc
Front Shear
Depressor
Crimper Bolt
Stock Drag
Terminal Hold-Down
Wire Crimper
Slot
Insulation Crimper
Strip Guides
Terminal Support
Anvil
Base Plate
Floating Shear (Front)
Lower Tooling
Assembly
C. Applicator (Typical, Figure 4 and Figure 10)
Figure 4
The side feed applicators used in this machine are the pre-feed type, and are interchangeable to provide a
wide range of terminations. The crimpers, anvil, and the rear floating shear (when used) are the same as
those used in the heavy duty miniature quick-change applicators. The upper portion of the applicator is the
applicator ram containing the upper tooling. The lower portion is the base plate which supports the anvil (lower
tooling), the strip guides, and the stock drag. The upper and lower portions have identification tags which
carry identical serial numbers to prevent mixing of portions with those of other applicators.
Rev E
7 of 26