409-10012 Datasheet, PDF (5/26 Pages) TE Connectivity Ltd – AMP-O-MATIC Side-Feed Stripper-Crimper

409-10012
The lockout valve, extending through the back of the machine cover, supplies air pressure to the two filters
and one regulator mounted on the right side of the frame. The gage is readable through the clear door. No air
line lubricator is required because the cylinders and valves are designed to operate on dry air. The air logic
components are mounted on the left side of the frame. The terminal feed mechanism is also mounted on the
left side of the frame in alignment with the applicator. It is actuated by the applicator ram to feed the terminal
strip into the “target area.” A terminal lubricator assembly is included with the machine.
Terminal Reel
Reel Support
Terminal Strip
Safety Valve
(LV5)
Operating
Pressure
Gage
Power Jack
Machine Frame
Operating Pressure
Filter/Regulator
Air Supply Connection
Lockout Valve
Auto-Hand Knob
Light Switch
“Target Area”
(Figure 8)
Scrap Shear
Rev E
Feed Return
Adjustment Screw
Figure 2
Filter
Auto Mode Sensitivity Valve
(LV4)
Stripping Mechanism
Threshold Sensor
Leveling Pad
(Typ 4 Places)
5 of 26