409-32035 Datasheet, PDF (5/20 Pages) TE Connectivity Ltd – AMP-O-LECTRIC Model G II

409-32035
Electrical Control
Box
Power Cord Outlet
Motor
Figure 3
Interlock Panel
Nut for
Manual
Cycle
Figure 4
2. The crankshaft-ram group conveys the motor rotational force to the up-and-down action of the ram
for driving the applicator during the crimping cycle.
3. The base plate provides the mounting surface on which the applicator is installed. The quick-release
latching feature permits fast, easy installation and removal of the applicator. See Figure 5.
4. The crimp height adjustment group uses an eccentric located in the ram linkage, along with
detented stops in the mechanism to adjust the crimp height. Indexing the mechanism in either
direction will change the crimp height in increments of approximately 0.01 mm [.0004 in.] per step.
Refer to Figure 5 for the Precision Crimp Height Adjustment Mechanism.
Rev C
5 of 20