409-32035 Datasheet, PDF (20/20 Pages) TE Connectivity Ltd – AMP-O-LECTRIC Model G II

409-32035
9. SOFTWARE VERSION IDENTIFICATION
1. Be sure machine is turned off.
2. Turn power to the machine on.
When the display on the control panel turns on, the control panel software version will be displayed briefly,
followed by the G II software version. Both versions follow the format “X.XX.XX.”
10. DISPOSAL
Contact TE for disposal.
11. REPLACEMENT AND REPAIR
See drawing and documentation package to identify parts. Order replacement parts through your TE
representative, or call 1-800-526-5142, or send a facsimile of your purchase order to 717-986-7605,
Or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
For customer repair service, call 1-800-526-5136.
12. RoHS INFORMATION
Information on the presence and location of any substances subject to RoHS (Restriction on Hazardous
Substances) can be found at the following website:
http://www.tycoelectronics.com/customersupport/rohssupportcenter/
Click on “Find Compliance Status" and enter equipment part number.
13. REVISION SUMMARY
Revisions to this customer manual include:
 Updated to most current TE logo (header/footers)
 Changed para 4.7. Note from Lubricator Bowl Assembly PN 354550-1 to -3, and added “When using an Ocean Side-Feed or
End-Feed applicator, the lubricator assembly part numbers are 2119955-1 and 2119955-2, respectively”.
 Revised Figure 16 callouts and replaced image
Rev C
20 of 20