409-32035 Datasheet, PDF (11/20 Pages) TE Connectivity Ltd – AMP-O-LECTRIC Model G II

Increase
Speed
Decrease
Speed
Full Cycle
Machine Status/
Error Code Display
Speed Indication
Guard Status
I ndic ation
Split Cycle
Air Feed
Decrease Speed- Decrease the motor speed for normal cycle operation and for jogging.
409-32035
Error Reset
Count Reset
Main Power
Switch
Jog Reverse
Jog Forward
Increase Speed - Increase the motor speed f or normal cycle operat ion and for jogging.
Error Reset - Clears the displayed error code.
Count Reset - Clears the batch count to 0.
Jog Forward - Causes t he mot or to rotat e in t he forward direct ion at the jog speed set by the Increase/Decrease speed
buttons.
Jog Reverse - Causes the motor to rotate in the reverse direction at the jog speed set by the Increase/Decrease speed
buttons.
Air Feed - Toggles the Air Feed Output on and off. The LED indicates the current condition.
Full Cycle - Places the terminator in ful cycle mode so that the terminator rotates one full cycle when the footswitch is
pressed. The LED indicates that this mode of operation is selected.
Split Cycle - Places the terminator in split cycle mode so that the terminator rotates to the down position on the first press
of the footswitch, and then completes the cycle on the second press of the footswitch. The LED indicates that this mode of
operation is selected.
Speed Indicati on -- Each “>” represent s a portion of t he full operation or jog speed set ting. Minimum speed is denoted
with a single “>. Maximum speed is denoted by “>>>>>>.”
Machine Status / Error Code Display -- Displays “OK” if there is no error code being displayed or “ERRxxx” when an
error has occurred. The “xxx” represents a number corresponding to an error described in the error code table (Figure 17).
Guard Status Indication-- A solid “n” indicates that the guard and top interlocks are closed. An open icon in this display
indicates that one of the interlocks is open. The motor wil not run when the guard interlocks are open.
Figure 9
Rev C
11 of 20