409-32035 Datasheet, PDF (18/20 Pages) TE Connectivity Ltd – AMP-O-LECTRIC Model G II

409-32035
17. Retighten cable gland securing air feed cable, use care not to over tighten and damage wire.
18. If applicable for assembly, attach items 200 (rear stop) and 201 (screw) to baseplate as shown -
remove back left base plate clamp.
19. Reverse procedure to reassemble cover and guards.
20. Install air feed applicator onto baseplate and connect to applicable ports.
21. Make sure slide valve is off - pulled away from filter.
22. For metric air line fittings, remove item 13 (adapter).
23. Attach air supply hose to air valve assembly.
24. To turn air on, slide item 12 (slide valve) towards item 10 (filter). To turn air off, slide item 12 (slide
valve) away from item 10 (filter). Make sure item 15 (lockout) is not connected to slide valve.
25. To lock air in off position, turn air off and clamp item 15 (lockout) in location shown. Secure lockout
with a lock (customer supplied).
NOTE
The air can be turned “off” by moving the slide valve away from the filter.
W I RE FRO M DO O R I NTERLO CK
Wire from Door Interlock
Rev C
Knockout Piece with Holes
KNO CKO UT PI ECE W I TH HO LES
Figure 15
Spring Return Air
Cylinder Collection
Air Feed Cable
Diode
Manual Valve
Override
Four-Way Solenoid Valve
Throttle Acting Air
Cylinder Collection
Valve Lockout Shown
Attached (Locked Position)
Air Off
Air Supply On/Off
Slide Valve
Air On
Auxiliary Air Connection
Figure 16
Manual Water Drain
18 of 20