SM59R16A2 Datasheet, PDF (57/67 Pages) SyncMOS Technologies,Inc – 8-Bit Micro-controller

SM59R16A2/SM59R08A2
8-Bit Micro-controller
64KB/32KB ISP Flash & 2KB RAM embedded
Mnemonic: KBLS
7
6
KBLS.7 KBLS.6
5
4
KBLS.5 KBLS.4
3
KBLS.3
2
KBLS.2
1
KBLS.1
Address: 93h
0
Reset
KBLS.0 00h
KBLS.7: EEI line 7 level selection bit
0 : enable a low level detection on P17.
1 : enable a high level detection on P17.
KBLS.6: EEI line 6 level selection bit
0 : enable a low level detection on P16.
1 : enable a high level detection on P16.
KBLS.5: EEI line 5 level selection bit
0 : enable a low level detection on P15.
1 : enable a high level detection on P15.
KBLS.4: EEI line 4 level selection bit
0 : enable a low level detection on P14.
1 : enable a high level detection on P14.
KBLS.3: EEI line 3 level selection bit
0 : enable a low level detection on P13.
1 : enable a high level detection on P13.
KBLS.2: EEI line 2 level selection bit
0 : enable a low level detection on P12.
1 : enable a high level detection on P12.
KBLS.1: EEI line 1 level selection bit
0 : enable a low level detection on P11.
1 : enable a high level detection on P11.
KBLS.0: EEI line 0 level selection bit
0 : enable a low level detection on P10.
1 : enable a high level detection on P10.
Mnemonic: KBE
7
6
KBE.7 KBE.6
5
KBE.5
4
KBE.4
3
KBE.3
2
KBE.2
1
KBE.1
Address: 94h
0
Reset
KBE.0 00h
KBE.7: EEI line 7 enable bit
0 : enable standard I/O pin.
1 : enable KBF.7 bit in KBF register to generate an interrupt request.
KBE.6: EEI line 6 enable bit
0 : enable standard I/O pin.
1 : enable KBF.6 bit in KBF register to generate an interrupt request.
KBE.5: EEI line 5 enable bit
0 : enable standard I/O pin.
1 : enable KBF.5 bit in KBF register to generate an interrupt request.
KBE.4: EEI line 4 enable bit
0 : enable standard I/O pin.
1 : enable KBF.4 bit in KBF register to generate an interrupt request.
KBE.3: EEI line 3 enable bit
0 : enable standard I/O pin.
1 : enable KBF.3 bit in KBF register to generate an interrupt request.
KBE.2: EEI line 2 enable bit
0 : enable standard I/O pin.
1 : enable KBF.2 bit in KBF register to generate an interrupt request.
KBE.1: EEI line 1 enable bit
0 : enable standard I/O pin.
1 : enable KBF.1 bit in KBF register to generate an interrupt request.
KBE.0: EEI line 0 enable bit
0 : enable standard I/O pin.
1 : enable KBF.0 bit in KBF register to generate an interrupt request.
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M034
57
Ver.B SM59R16A2/SM59R08A2 06/2009