M37517F8HP Datasheet, PDF (68/98 Pages) Renesas Technology Corp – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

7517 Group
ID Code Check Function (in Standard serial
I/O mode)
Use this function in standard serial I/O mode. When the contents
of the flash memory are not blank, the ID code sent from the pro-
grammer is compared with the ID code written in the flash memory
to see if they match. If the ID codes do not match, the commands
sent from the programmer are not accepted. The ID code consists
of 8-bit data, and its areas are FFD416 to FFDA16. Write a pro-
gram which has had the ID code preset at these addresses to the
flash memory.
Address
FFD416
FFD516
FFD616
FFD716
FFD816
FFD916
FFDA16
FFDB16
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ROM code protect control
Interrupt vector area
Fig. 71 ID code store addresses
Rev.1.01 Aug 02, 2004 page 68 of 96