H8S2112R Datasheet, PDF (544/984 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcomputer H8S Family / H8S/2100 Series

Section 17 I²C Bus Interface (IIC)
Initial
Bit Bit Name Value R/W Description
5
ICDRF
0
R
Receive Data Read Request Flag
Indicates the ICDR (ICDRR) status in receive mode.
0: Indicates that the data has been already read from
ICDR (ICDRR) or ICDR is initialized.
1: Indicates that data has been received successfully
and transferred from ICDRS to ICDRR, and the data
is ready to be read out.
[Setting conditions]
When data is received successfully and transferred
from ICDRS to ICDRR.
(1) When data is received successfully while ICDRF =
0 (at the rise of the 9th clock pulse).
(2) When ICDR is read successfully in receive mode
after data was received while ICDRF = 1.
[Clearing conditions]
• When ICDR (ICDRR) is read.
• When 0 is written to the ICE bit.
• When the IIC is internally initialized using the CLR3
to CLR0 bits in DDCSWR.
When ICDRF is set due to the condition (2) above,
ICDRF is temporarily cleared to 0 when ICDR (ICDRR)
is read; however, since data is transferred from ICDRS
to ICDRR immediately, ICDRF is set to 1 again.
Note that ICDR cannot be read successfully in transmit
mode (TRS = 1) because data is not transferred from
ICDRS to ICDRR. Be sure to read data from ICDR in
receive mode (TRS = 0).
Rev. 1.00 May 09, 2008 Page 518 of 954
REJ09B0462-0100