PD178004A_15 Datasheet, PDF (47/58 Pages) Renesas Technology Corp – PD178004A_15

µPD178004A, 178006A, 178016A, 178018A
A/D CONVERTER CHARACTERISTICS (TA = –40 to +85 °C, VDD = 4.5 to 5.5 V)
Parameter
Resolution
Conversion total
error
Conversion time
Sampling time
Analog input
voltage
Symbol
tCONV
tSAMP
VIAN
Test Conditions
MIN.
8
22.2
15/fXX
0
Remarks 1. fXX: System clock frequency (fX/2)
2. fX: System clock oscillation frequency
TYP.
8
MAX. Unit
8
bit
±3.0 LSB
44.4
µs
µs
VDD
V
PLL CHARACTERISTICS (TA = –40 to +85 °C, VDD = 4.5 to 5.5 V)
Parameter
Operating
Frequency
Symbol
Test Conditions
fIN1 VCOL Pin MF Mode Sine wave input VIN = 0.1 Vp-p
fIN2 VCOL Pin HF Mode Sine wave input VIN = 0.2 Vp-p
fIN3 VCOH Pin VHF Mode Sine wave input VIN = 0.15 Vp-p
MIN.
0.5
9
60
TYP.
MAX.
3
55
160
Unit
MHz
MHz
MHz
IFC CHARACTERISTICS (TA = –40 to +85 °C, VDD = 4.5 to 5.5 V)
Parameter
Operating
Frequency
Symbol
Test Conditions
fIN4 AMIFC Pin AMIF Count Mode
Sine wave input VIN = 0.1 Vp-p ^Note
fIN5 FMIFC Pin FMIF Count Mode
Sine wave input VIN = 0.1 Vp-p ^Note
fIN6 FMIFC Pin AMIF Count Mode
Sine wave input VIN = 0.1 Vp-p ^Note
MIN.
0.4
TYP.
MAX.
0.5
Unit
MHz
10
11 MHz
0.4
0.5 MHz
Note
The condition of a sine wave input of VIN = 0.1 Vp-p is the standard value for operation of this device during
stand-alone operation, so in consideration of the effect of noise, it is recommended that operation be at
an input amplitude condition of VIN = 0.15 Vp-p.
45