PD178004A_15 Datasheet, PDF (35/58 Pages) Renesas Technology Corp – PD178004A_15

µPD178004A, 178006A, 178016A, 178018A
DC CHARACTERISTICS (TA = –40 to +85 °C, VDD = 3.5 to 5.5 V)
Parameter
Symbol
Test Conditions
Power Supply ^{Note 1}
Current
IDD1 While the CPU is operating TCY = 0.89 µs ^{Note 2}
and the PLL is stopped
IDD2
fX = 4.5 MHz operation
TCY = 0.44 µs ^{Note 3}
VDD = 4.5 to 5.5 V
IDD3 While the CPU is operating TCY = 0.89 µs ^{Note 2}
and the PLL is stopped
HALT Mode
IDD4
Pin X1 sine wave
input VIN = VDD.
fX = 4.5 MHz operation
TCY = 0.44 µs ^{Note 3}
VDD = 4.5 to 5.5 V
Data Hold
Power Supply
Voltage
Data Hold
Power Supply Current
VDR1
VDR2
VDR3
IDR1
IDR2
When the crystal is oscillating TCY = 0.44 µs
TCY = 0.89 µs
When the crystal oscillator is stopped
When power off by Power On Clear is detected
While the crystal oscillator
is stopped
TA = 25 °C, VDD = 5V
MIN.
TYP.
2.5
MAX.
15
(3/3)
Unit
mA
4.0
27
mA
0.7
1.5
mA
1.0
2.0
mA
4.5
3.5
2.6
2
2
5.5
V
5.5
V
5.5
V
4
µA
30
µA
Notes
1. The port current is not included.
2. When the Processor Clock Control register (PCC) is set at 00H, and the Oscillation Mode Select
register (OSMS) is set at 00H.
3. When PCC is set at 00H and OSMS is set at 01H.
Remarks 1. TCY: Cycle Time (Minimum instruction execution time)
2. fx: System clock oscillator frequency.
REFERENCE CHARACTERISTICS (TA = 25 °C, VDD = 5 V)
Parameter
Power Supply
Current
Symbol
Test Conditions
IDD5 During CPU operation
and PLL operation.
VCOH pin sine wave
input
fIN = 130 MHz,
VIN = 0.15 Vp-p
TCY = 0.44 µs ^Note
MIN.
TYP.
7
MAX.
(2/2)
Unit
mA
Note When the Processor Clock Control register (PCC) is set at 00H, and the Oscillation Mode Select register
(OSMS) is set at 01H.
Remark TCY: Cycle Time (Minimum instruction execution time)
33