PD178004A_15 Datasheet, PDF (32/58 Pages) Renesas Technology Corp – PD178004A_15

µPD178004A, 178006A, 178016A, 178018A
10. ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C)
Parameter
Symbol
Test Conditions
Rating
Unit
Power supply voltage VDD
Input voltage
VI1
VI2
Output voltage
VO
Excluding P60 to P63
P60 to P63
N-ch Open-drain
–0.3 to + 7.0
V
–0.3 to VDD + 0.3
V
–0.3 to +16
V
–0.3 to VDD + 0.3
V
Output withstand
voltage
VBDS P132 to P134
N-ch Open-drain
16
V
Analog input voltage VAN P10 to P15
Analog input pin
–0.3 to VDD + 0.3
V
Output current high IOH 1 pin
–10
mA
P01 to P06, P30 to P37, P56, P57, P60 to P67,
–15
mA
P120 to P125 total
P10 to P15, P20 to P27, P40 to P47, P50 to P55,
–15
mA
P132 to P134 total
Output current low IOL ^Note 1 pin
Peak value
15
mA
Effective value
7.5
mA
Operating ambient
TA
temperature
–40 to +85
°C
Storage temperature Tstg
–65 to +150
°C
Note Effective value should be calculated as follows: [Effective value] = [Peak value] × √duty
Caution Product quality may suffer if the absolute maximum rating is exceeded for even a single
parameter even momentarily. That is, the absolute maximum ratings are rated values at which
the product is on the verge of suffering physical damage, and therefore the product must be
used under conditions which ensure that the absolute maximum ratings are not exceeded.
Remark The characteristics of alternate-function pins and port pins are the same unless specified otherwise.
RECOMMENDED SUPPLY VOLTAGE RANGES (TA = –40 to +85 °C)
Parameter
Symbol
Test Conditions
Power supply voltage VDD1 During CPU operation and PLL operation.
VDD2
While the CPU is operating and the PLL is stopped.
Cycle Time: TCY ≥ 0.89 µs
VDD3
While the CPU is operating and the PLL is stopped.
Cycle Time: TCY = 0.44 µs
MIN.
4.5
3.5
TYP.
MAX. Unit
5.5
V
5.5
V
4.5
5.5
V
Remark TCY: Cycle Time (Minimum instruction execution time)
30