R01AN1504EJ0100 Datasheet, PDF (46/50 Pages) Renesas Technology Corp – Using the DTC to Perform Continuous Clock

RL78/G14
4.8.16 Main Initialization
Figure 4.20 shows the main initialization.
Using the DTC to Perform Continuous Clock
Synchronous Serial Communication
R_MAIN_UserInit
Initialize the receive data
Set the transmit data
transmit_data_set()
Set the transmit/receive status to
transmission/reception end
CSI00 operation start
R_CSI00_Start()
Enable maskable interrupts
IE ← 1
Figure 4.20 Main Initialization
4.8.17 Transmit Data Setting
Figure 4.21 shows the transmit data setting.
return
transmit_data_set
Set the transmit data
Figure 4.21 Transmit Data Setting
return
R01AN1504EJ0100 Rev. 1.00
Feb. 14, 2014
Page 46 of 47