R01AN1504EJ0100 Datasheet, PDF (44/50 Pages) Renesas Technology Corp – Using the DTC to Perform Continuous Clock

RL78/G14
4.8.14 DTCD0 Operation Stop
Figure 4.18 shows DTCD0 operation stop.
R_DTCD0_Stop
Using the DTC to Perform Continuous Clock
Synchronous Serial Communication
Disable to activate the DTC by
CSI00 transfer end
DTCEN1 register
DTCEN13 bit ← 0: Activation disabled
return
Figure 4.18 DTCD0 Operation Stop
Disabling to activate the DTC by CSI00 transfer end
• DTC activation enable register 1 (DTCEN1)
Symbol
7
6
5
4
3
2
1
0
DTCEN1 DTCEN17 DTCEN16 DTCEN15 DTCEN14 DTCEN13 DTCEN12 DTCEN11 DTCEN10
Value
×
×
×
×
0
×
×
×
• Bit 3
DTCEN13
bit
0
Activation disabled
1
Activation enabled
DTC activation enable 13
For details on register setting, refer to the RL78/G14 User’s Manual: Hardware.
Legend symbol:
×: Unused bit; blank cell: unchanged bit; ‒: reserved bit or unallocated bit
R01AN1504EJ0100 Rev. 1.00
Feb. 14, 2014
Page 44 of 47