R01AN1504EJ0100 Datasheet, PDF (45/50 Pages) Renesas Technology Corp – Using the DTC to Perform Continuous Clock

RL78/G14
4.8.15 Main Processing
Figure 4.19 shows the main processing.
main
Main initialization
R_MAIN_UserInit()
Using the DTC to Perform Continuous Clock
Synchronous Serial Communication
Transmission/reception
No
completed?
Yes
DTCD0 operation stop
R_DTCD0_Stop()
csi_status = 0: During transmission/reception
csi_status = 1: Transmission/reception completed
DTC initialization
R_DTC_Create()
DTCD0 operation start
R_DTCD0_Start()
CSI00 transmission/reception start
R_CSI00_Send_Receive()
Set the transmit/receive status to
during transmission/reception
Figure 4.19 Main Processing
R01AN1504EJ0100 Rev. 1.00
Feb. 14, 2014
Page 45 of 47