AR0833 Datasheet, PDF (52/64 Pages) ON Semiconductor – 8 Mp CMOS Digital Image Sensor

AR0833: 1/3.2-Inch 8 Mp CMOS Digital Image Sensor
Integration Time for Interlaced HDR Readout
Global Reset and Soft Standby
If the R0x301A[2] mode_select[stream] bit is cleared while a global reset sequence is in
progress, the AR0833 will remain in streaming state until the global reset sequence
(including frame readout) has completed, as shown in Figure 40 on page 52.
Figure 40: Entering Soft Standby During a Global Reset Sequence
ERS
R0x0100
mode_select[streaming]
Row Reset
system state
Integration
Readout ERS
Streaming
Software
Standby
Slave Mode
Slave mode is to ensure having an ERS-GRR-ERS transition without a broken ERS frame
before GRR. It requests to trigger/end the GRR sequence through the pin which is similar
to the GRR Bulb mode. The major difference to our existing sensor is to start the GRR
sequence after the end of the current frame instead of to start immediately in the next
following row.
Figure 41: Slave Mode Transition
AR0833_DS Rev. H Pub. 4/15 EN
52
©Semiconductor Components Industries, LLC, 2015.