AR0833 Datasheet, PDF (20/64 Pages) ON Semiconductor – 8 Mp CMOS Digital Image Sensor

AR0833: 1/3.2-Inch 8 Mp CMOS Digital Image Sensor
Two-Wire Serial Register Interface
Sequential READ, Start from Random Location
This sequence (Figure 11) starts in the same way as the single READ from random loca-
tion (Figure 9). Instead of generating a no-acknowledge bit after the first byte of data has
been transferred, the master generates an acknowledge bit and continues to perform
byte READs until “L” bytes have been read.
Figure 11: Sequential READ, Start from Random Location
Previous Reg Address, N
Reg Address, M
S Slave Address 0 A Reg Address[15:8] A Reg Address[7:0] A Sr Slave Address 1 A
Read Data
M+1
A
M+1
Read Data
A
M+2
M+3
Read Data
A
M+L-2
Read Data
A
M+L-1
Read Data
M+L
AP
Sequential READ, Start from Current Location
This sequence (Figure 12) starts in the same way as the single READ from current loca-
tion (Figure 10 on page 19). Instead of generating a no-acknowledge bit after the first
byte of data has been transferred, the master generates an acknowledge bit and
continues to perform byte READs until “L” bytes have been read.
Figure 12: Sequential READ, Start from Current Location
Previous RegAddress, N
N+1
N+2
N+L-1
N+L
S Slave Address 1 A
Read Data A
Read Data A
Read Data A
Read Data A P
Single WRITE to Random Location
This sequence (Figure 13) begins with the master generating a start condition. The slave
address/data direction byte signals a WRITE and is followed by the HIGH then LOW
bytes of the register address that is to be written. The master follows this with the byte of
write data. The WRITE is terminated by the master generating a stop condition.
Figure 13: Single WRITE to Random Location
Previous Reg Address, N
Reg Address, M M+1
S Slave Address 0 A Reg Address[15:8] A Reg Address[7:0] A
Write Data
AP
A
AR0833_DS Rev. H Pub. 4/15 EN
20
©Semiconductor Components Industries, LLC, 2015.