ASX340AT Datasheet, PDF (41/75 Pages) ON Semiconductor – Color CMOS NTSC/PAL Digital Image

ASX340CS: 1/4-Inch Color CMOS NTSC/PAL Digital Image Sensor
Slave Two-Wire Serial Interface
Sequential WRITE, Start at Random Location
This sequence (Figure 22) starts in the same way as the single WRITE to random location
(Figure 21). Instead of generating a no-acknowledge bit after the first byte of data has
been transferred, the master generates an acknowledge bit and continues to perform
byte writes until “L” bytes have been written. The WRITE is terminated by the master
generating a stop condition.
Figure 22: Sequential WRITE, Start at Random Location
Previous Reg Address, N
Reg Address, M M+1
S Slave Address 0 A Reg Address[15:8] A Reg Address[7:0] A
Write Data
A
M+1
M+2
M+3
Write Data
(15:8)
A
Write Data
(7:0)
A
Wr(i1te5:D_W8)atra_iteADW_atri(_at7e:0D)ata
AA
M+L-2
M+L-1
M+L
Wr(i1te5:D_W8a)tra_iteADW_atri(_at7e:0D)ata _A
Wr(i1te5:D_W8a)tra_iteADW_atri(_at7e:0D)ata
A
A
P
ASX340AT/D Rev. H, 8/15 EN
41
©Semiconductor Components Industries, LLC, 2015.