English
Language : 

NT3H2211W0FHKH Datasheet, PDF (3/77 Pages) NXP Semiconductors – NTAG I2C plus, NFC Forum Type 2 Tag compliant IC with I2C interface
NXP Semiconductors
NT3H2111/NT3H2211
NFC Forum Type 2 Tag compliant IC with I2C interface
 Data integrity of 16-bit CRC, parity, bit coding, bit counting
 Operating distance of up to 100 mm (depending on various parameters, such as field
strength and antenna geometry)
 True anticollision
 Unique 7 byte serial number (cascade level 2 according to ISO/IEC 14443-3
(see Ref. 2)
2.3 Memory
 1912 bytes freely available with User Read/Write area (478 pages with 4 bytes per
pages) for the 2k version
 888 bytes freely available with User Read/Write area (222 pages with 4 bytes per
pages) for the 1k version
 64 bytes SRAM volatile memory without write endurance limitation
 Data retention time of minimum 20 years
 EEPROM write endurance minimum 500.000 cycles
2.4 I²C interface
 I²C slave interface supports frequencies up to 400 kHz (see Section 13.1)
 16 bytes (one block) written in 4.5 ms (EEPROM) or 0.4 ms (SRAM - pass-through
mode) including all overhead
 RFID chip can be used as standard I2C EEPROM and I²C SRAM
2.5 Security
 Manufacturer-programmed 7-byte UID for each device
 Capability container with one time programmable bits
 Field programmable read-only locking function per page for first 12 pages and per 16
(1k version) or 32 (2k version) pages for the extended memory section
 ECC-based originality signature
 32-bit password protection to prevent unauthorized memory operations from NFC
perspective may be enabled for parts of, or complete memory
 Access to protected data from I²C perspective may be restricted
 Pass-through and mirror mode operation may be password protected
 Protected data can be safeguarded against limited number of negative password
authentication attempts
2.6 Key benefits
 Full interoperability with every NFC-enabled device
 Smooth end-user experience with super-fast data exchange via NFC and I²C interface
 Zero-power operation with non-volatile data storage
 Lowest bill of materials and smallest footprint for NFC solution in embedded
electronics
 Data protection to prevent unauthorized data manipulation
 Multi-application support, enabled by memory size and segmentation options
NT3H2111/NT3H2211
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3.0 — 3 February 2016
359930
© NXP Semiconductors N.V. 2016. All rights reserved.
3 of 77