CS4103 Datasheet, PDF (19/24 Pages) National Semiconductor (TI) – IEEE P1394a Physical Layer Device

4.0 Electrical Characteristics
This section provides information on absolute maximum
ratings, recommended operating conditions, and DC/AC
characteristics for the Geode CS4103.
4.1 ABSOLUTE MAXIMUM RATINGS
Table 4-1 lists the absolute maximum ratings for the
CS4103. Stresses beyond the listed ratings may cause
permanent damage to the device. Exposure to conditions
beyond these limits may (1) reduce device reliability and (2)
result in premature failure even when there is no immedi-
ately apparent sign of failure. Prolonged exposure to condi-
tions at or near the absolute maximum ratings may also
reduce useful life and reliability. These are stress ratings
only and do not imply that operation under any conditions
other than those listed in Table 4-1 is possible.
4.2 OPERATING CONDITIONS
Table 4-2 lists the operating conditions for the CS4103.
Parameter
Supply Voltage, V_DD
Input Voltage
Output Voltage
Storage Temperature, T_STG
ESD Tolerance
Lead Temperature, T_L
Table 4-1. Absolute Maximum Ratings
Units
–0.5V to 4.1V
–0.5V to V_DD+0.5V
–0.5V to V_DD+0.5V
–65°C to 150°C
2000V
230°C (Soldering 10 seconds)
Parameter
Supply Voltage, V_DD
Operating Temperature, T_A
Crystal
Table 4-2. Operating Conditions
Units
3.0V to 3.6V
0°C to 70°C
24.576 MHz +/–100 ppm
Revision 1.0
19
www.national.com