MC9S12B128_05 Datasheet, PDF (89/132 Pages) Motorola, Inc – Covers also preliminary MC9S12B64 using MC9S12B128 die

Device User Guide —9S12B128DGV1/D V01.13
Table A-7 3.3V I/O Characteristics
Conditions are VDDX=3.3V +/-10% Termperature from -40¯C to +140¯C, unless otherwise noted
Num C
Rating
Symbol Min
Typ
1 P Input High Voltage
V_IH
0.65*V_DD5
-
2 P Input Low Voltage
V_IL
V_SS5 - 0.3
-
3 C Input Hysteresis
V_HYS
250
Input Leakage Current (pins in high impedance input
4 P ^mode)
V_in = V_DD5 or V_SS5
I_in
–1
-
Output High Voltage (pins in output mode)
5 P ^{Partial Drive IOH = –0.75mA}
Full Drive IOH = –4.0mA
V_OH
V_DD5 – 0.4
-
Output Low Voltage (pins in output mode)
6 P ^{Partial Drive IOL = +0.9mA}
Full Drive IOL = +4.75mA
V_OL
-
-
Internal Pull Up Device Current,
7 P _{tested at VIL Max.}
I_PUL
-
-
Internal Pull Up Device Current,
8 C _{tested at VIH Min.}
I_PUH
-6
-
Internal Pull Down Device Current,
9 P _{tested at VIH Min.}
I_PDH
-
-
Internal Pull Down Device Current,
10 C _{tested at V Max.}
IL
11 D Input Capacitance
I_PDL
6
-
C_in
7
Injection current¹
12 T _{Single Pin limit}
Total Device Limit. Sum of all injected currents
I_ICS
-2.5
-
I_ICP
-25
13 P _{Port H, J, P Interrupt Input Pulse filtered}²
t_pign
14 P _{Port H, J, P Interrupt Input Pulse passed}²
t_pval
10
NOTES:
1. Refer to Section A.1.4 Current Injection, for more details
2. Parameter only applies in STOP or Pseudo STOP mode.
Max Unit
V_DD5 + 0.3 V
0.35*V_DD5
V
mV
1
µA
-
V
0.4
V
–60
µA
-
µA
60
µA
-
µA
-
pF
2.5
mA
25
3
µs
µs
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
89