MC9S12B128_05 Datasheet, PDF (2/132 Pages) Motorola, Inc – Covers also preliminary MC9S12B64 using MC9S12B128 die

Revision History
DOCUMENT NUMBER
9S12B128DGV1/D
Version Revision Effective
Number Date
Date
V01.00
20 NOV 20 NOV
2002
2002
V01.01
27 JAN
2003
01 FEB
2003
V01.02
24 FEB
2003
24 FEB
2003
V01.03
18MAR
2003
18 MAR
2003
V01.04
05MAY
2003
05 MAY
2003
V01.05
20 JUN
2003
20 JUN
2003
V01.06
V01.07
V01.08
V01.09
V01.10
V01.11
V01.12
01 SEP
2003
31 OCT
2003
22 JAN
2004
24 FEB
2004
17 MAR
2004
13 AUG
2004
20 JUN
2005
01 SEP
2003
31 OCT
2003
22 JAN
2004
24 FEB
2004
17 MAR
2004
13 AUG
2004
20 JUN
2005
Author
Description of Changes
Initial version based on MC9S12DGJ64-1.10 Version.
updated Table 0-1; added submodule configuration in Section 6 &
Section 11. Updated memory map $0118-$011B
updated Table 0-1; updated section 2.2.28; Updated memory map
$0101.
added the IIC to the document; added for B64 more details in the
preface and the according “Memory Map out of Reset”
Updated bus frequency in Table A-4; updated numbers in A.3.1.2
and A.3.1.3
Updated B64 details. Corrected numbering in Table A-26.
Replaced references to HCS12 Core Guide by the individual
HCS12 Block guides.
Table 2-1 corrected pullrresistor reset state PE4-PE2.
Table A-1 corrected footnote on clamp of TEST pin.
Updated Section 11, Section 15, A.5.2 Oscillator
Table A-15 corrected Num 9 and 10.
Added Table 0-2 and note at Section 8.1
Updated Table 1-3
Updated Table 0-5, row 6 of Table A-15
Added Table 0-3, updated Figure 0-1 and Table 1-3
Added Table 0-4; updated Table 1-3; added Note in Section 11;
row 5 & 6 of Table A-7; row 4 & 7 Table A-17; A.5.1.5; A.5.1.6;
Table A-20 row 13 & 14
Updated Figure 0-1. Updated Table A-10 and Table A-11.
Updated Table A-16 and section A.3.2.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in
different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the
Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized
application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
©Motorola, Inc., 2001
2