MC68HC705C8A Datasheet, PDF (170/222 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Electrical Specifications
13.3 Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be
exposed without permanently damaging it.
The MCU contains circuitry to protect the inputs against damage from
high static voltages; however, do not apply voltages higher than those
shown in the table here. Keep V_In and V_Out within the range
V_SS ≤ (V_In or V_Out) ≤ V_DD. Connect unused inputs to the appropriate
voltage level, either V_SS or V_DD.
Rating⁽¹⁾
Supply voltage
Input voltage
Programming voltage
Bootstrap mode (IRQ pin only)
Current drain per pin excluding
V_DD and V_SS
Storage temperature range
1. Voltages referenced to V_SS
Symbol
V_DD
V_In
V_PP
V_In
I
T_STG
Value
–0.3 to +7.0
V_SS –0.3
to V_DD +0.3
V_DD –0.3 to
16.0
V_SS – 0.3
to 2 x V_DD + 0.3
25
–65 to +150
Unit
V
V
V
mA
°C
NOTE:
This device is not guaranteed to operate properly at the maximum
ratings. Refer to 13.7 5.0-Volt DC Electrical Characteristics and
13.8 3.3-Volt DC Electrical Characteristics for guaranteed operating
conditions.
Technical Data
170
Electrical Specifications
MC68HC705C8A — Rev. 2.0
MOTOROLA