RFPIC12F675 Datasheet, PDF (93/136 Pages) Microchip Technology – FLASH-Based Microcontroller with ASK/FSK Transmitter

rfPIC12F675
13.4 DC Characteristics: rfPIC12F675-E (Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40C  TA  +125C for extended
Param
No.
Device Characteristics
Min Typ† Max Units
VDD
Conditions
Note
D010E Supply Current (IDD)⁽³⁾
—
9
16
A
2.0 FOSC = 32 kHz
— 18 28
A
3.0 ^{LP Oscillator Mode}
— 35 54
A
5.0
D011E
— 110 150 A
— 190 280 A
2.0 FOSC = 1 MHz
3.0 ^{XT Oscillator Mode}
— 330 450 A
5.0
D012E
— 220 280 A
— 370 650 A
2.0 FOSC = 4 MHz
3.0 ^{XT Oscillator Mode}
— 0.6 1.4 mA 5.0
D013E
— 70 110 A
— 140 250 A
2.0 FOSC = 1 MHz
3.0 ^{EC Oscillator Mode}
— 260 390 A
5.0
D014E
— 180 250 A
— 320 470 A
2.0 FOSC = 4 MHz
3.0 ^{EC Oscillator Mode}
— 580 850 A
5.0
D015E
— 340 450 A
— 500 780 A
2.0 FOSC = 4 MHz
3.0 ^{INTOSC Mode}
— 0.8 1.1 mA 5.0
D016E
— 180 250 A
— 320 450 A
2.0 FOSC = 4 MHz
3.0 ^{EXTRC Mode}
— 580 800 A
5.0
D017E
— 2.1 2.95 mA
— 2.4 3.0 mA
4.5 FOSC = 20 MHz
5.0 ^{HS Oscillator Mode}
† Data in ‘Typ’ column is at 5.0V, 25C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The test conditions for all IDD measurements in Active Operation mode are: OSC1 = external square wave,
from rail to rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern, and temperature also have
an impact on the current consumption.
3: Total device current is the sum of IDD from VDD and IDDRF from VDDRF.
 2003-2013 Microchip Technology Inc.
Preliminary
DS70091B-page 93