|
RFPIC12F675 Datasheet, PDF (4/136 Pages) Microchip Technology – FLASH-Based Microcontroller with ASK/FSK Transmitter | |||
|
◁ |
rfPIC12F675
TABLE 1-1: rfPIC12F675 PINOUT
PIN
BUFFER
IN
OUT
WEAK
PULL-UP
DESCRIPTION
1 VDD
Direct â
â Power Supply
GP5
TTL CMOS
Prog
General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
2 T1CKI
ST
â
â Timer1 clock
OSC1
Xtal
â
Bias XTAL connection
CLKIN
ST
â
â External RC network or clock input
GP4
TTL CMOS
Prog
General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
T1G
3 AN3
ST
â
Analog â
â Timer1 gate
â A/D Channel 3 input
OSC2
â
Xtal
Bias XTAL connection
CLKOUT â CMOS
â
TOSC/4 reference clock
GP3
4
MCLR
TTL
â
ST
â
General purpose input. Individually controlled interrupt-on-
change.
No Master Clear Reset
VPP
HV
â
â Programming voltage
5 RFXTAL Xtal
Xtal
Bias RF Crystal
6 RFEN
TTL
â
â RF Enable
7 REFCLK â CMOS
â
Reference Clock/4 Output (on rfPIC12F675K/F)
Reference Clock/8 Output (on rfPIC12F675H)
8 PS
Analog â
Bias Power Select
9 VDDRF
Direct â
â RF Power Supply
10 VSSRF
Direct â
â RF Ground Reference
11 ANT
â
OD
â RF power amp output to antenna
12 VSSRF
Direct â
â RF Ground Reference
13 LF
Analog Analog
â Loop Filter
14 DATAASK TTL
â
â ASK modulation data
15 DATAFSK TTL
â
â FSK modulation data
16 FSKOUT
â
OD
â FSK output to modulate reference crystal
GP2
ST CMOS
Prog
General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull up.
AN2
17 COUT
Analog â
â CMOS
â A/D Channel 2 input
â Comparator output
T0CKI
ST
â
â External clock for Timer0
INT
ST
â
â External interrupt
GP1
TTL CMOS
Prog
General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
AN1
18 CIN-
Analog â
Analog â
â A/D Channel 1 input
â Comparator input - negative
VREF
Analog â
â External voltage reference
ICSPCLK ST
â
â Serial programming clock
GP0
TTL CMOS
Prog
General purpose I/O. Individually controlled interrupt-on-change.
Individually enabled pull-up.
19 AN0
Analog â
â A/D Channel 0 input
CIN+
Analog â
â Comparator input - positive
ICSPDAT TTL CMOS
â Serial Programming Data I/O
20 VSS
Direct â
â Ground reference
Legend: TTL = TTL input buffer, ST = Schmitt Trigger input buffer, OD = Open Drain output
DS70091B-page 4
Preliminary
ï£ 2003-2013 Microchip Technology Inc.
|
▷ |