LAN8810I-AKZE Datasheet, PDF (49/100 Pages) Microchip Technology – GMII 10/100/1000 Ethernet Transceiver with HP Auto-MDIX Support

4.2.5
GMII 10/100/1000 Ethernet Transceiver with HP Auto-MDIX Support
Datasheet
Auto Negotiation Advertisement Register
Index (In Decimal): 4
Size:
16 bits
BITS
15
14
13
12
11
10
9
8
7
6
5
4:0
DESCRIPTION
Next Page
0 = no next page ability
1 = next page capable
Note: This device does not support next page ability.
RESERVED
Remote Fault
0 = no remote fault
1 = remote fault detected
RESERVED
Asymmetric Pause
0 = Asymmetrical pause direction is not supported by MAC
1 = Asymmetrical pause direction is supported by MAC
Pause Operation (PAUSE)
0 = Pause operation is not supported by MAC
1 = Pause operation is supported by MAC
RESERVED
100BASE-TX Full Duplex
0 = no TX full duplex ability
1 = TX with full duplex
100BASE-TX
0 = no TX ability
1 = TX able
10BASE-T Full Duplex
0 = no 10Mbps with full duplex ability
1 = 10Mbps with full duplex
10BASE-T
0 = no 10Mbps ability
1 = 10Mbps able
Selector Field
00001 = IEEE 802.3
TYPE
R/W
DEFAULT
0b
RO
-
R/W
0b
RO
-
R/W
0b
R/W
Note 4.3
RO
-
R/W
Note 4.4
R/W
Note 4.4
R/W
Note 4.4
R/W
Note 4.4
R/W
00001b
Note 4.3
Note 4.4
The default is determined by the CONFIG1 pin as described in Section 3.8.1.2.1,
"Configuring the SMI Address (CONFIG[1:0])," on page 30
The default is determined by the CONFIG[3:2] pins as described in Section 3.8.1.2.3,
"Configuration Bits Impacted by the Mode of Operation," on page 33.
SMSC LAN8810/LAN8810i
49
DATASHEET
Revision 1.0 (02-06-13)