PIC16F1938_13 Datasheet, PDF(387/488 Page) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PIC16F1938_13 Datasheet, PDF (387/488 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver

◁

PIC16(L)F1938/9

30.4

DC Characteristics: PIC16(L)F1938/39-I/E

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40Â°C ï£ TA ï£ +85Â°C for industrial

-40Â°C ï£ TA ï£ +125Â°C for extended

Param

No.

Sym.

Characteristic

Min.

Typâ

Max. Units

Conditions

VIL

Input Low Voltage

I/O PORT:

D032

with TTL buffer

â

â

0.8

V 4.5V ï£ VDD ï£ 5.5V

D032A

â

â

0.15 VDD V 1.8V ï£ VDD ï£ 4.5V

D033

with Schmitt Trigger buffer

â

with I2Câ¢ levels

â

â

0.2 VDD V 2.0V ï£ VDD ï£ 5.5V

â

0.3 VDD V

D034

with SMBus levels

â

MCLR, OSC1 (RC mode)(1)

â

â

0.8

V 2.7V ï£ VDD ï£ 5.5V

â

0.2 VDD V

D034A

OSC1 (HS mode)

â

â

0.3 VDD V

VIH

Input High Voltage

I/O ports:

D040

with TTL buffer

2.0

â

â

V 4.5V ï£ VDDï ï£ 5.5V

D040A

0.25 VDD +

â

0.8

â

V 1.8V ï£ VDD ï£ 4.5V

D041

with Schmitt Trigger buffer 0.8 VDD

â

with I2Câ¢ levels

0.7 VDD

â

â

V 2.0V ï£ VDD ï£ 5.5V

â

V

with SMBus levels

2.1

â

â

V 2.7V ï£ VDD ï£ 5.5V

D042

MCLR

0.8 VDD

â

â

V

D043A

OSC1 (HS mode)

0.7 VDD

â

â

V

D043B

IIL

OSC1 (RC mode)

Input Leakage Current(2)

0.9 VDD

â

â

V (Note 1) VDD > 2.0V

D060

D061

I/O ports

MCLR(3)

â

Â±5

Â± 125 nA VSS ï£ VPIN ï£ VDD, Pin at high-

impedance @ 85Â°C

Â±5

Â± 1000 nA 125Â°C

â

Â± 50

Â± 200

nA VSS ï£ VPIN ï£ VDD @ 85Â°C

IPUR Weak Pull-up Current

D070*

VOL

Output Low Voltage(4)

25

100

200

VDD = 3.3V, VPIN = VSS

25

140

300

ïA VDD = 5.0V, VPIN = VSS

D080

I/O ports

VOH

Output High Voltage(4)

IOL = 8mA, VDD = 5V

â

â

0.6

V IOL = 6mA, VDD = 3.3V

IOL = 1.8mA, VDD = 1.8V

D090

I/O ports

VDD - 0.7

â

IOH = 3.5mA, VDD = 5V

â

V IOH = 3mA, VDD = 3.3V

IOH = 1mA, VDD = 1.8V

*

â

Note 1:

2:

3:

4:

These parameters are characterized but not tested.

Data in âTypâ column is at 3.0V, 25Â°C unless otherwise stated. These parameters are for design guidance only and are

not tested.

In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external

clock in RC mode.

Negative current is defined as current sourced by the pin.

The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent

normal operating conditions. Higher leakage current may be measured at different input voltages.

Including OSC2 in CLKOUT mode.

ï£ 2011-2013 Microchip Technology Inc.

DS40001574C-page 387

▷