PIC16F1933_11 Datasheet, PDF (374/430 Pages) Microchip Technology – 28-Pin Flash-Based, 8-Bit CMOS Microcontrollers LCD Driver and nanoWatt XLP Technology

PIC16(L)F1933
30.2 DC Characteristics: PIC16(L)F1933-I/E (Industrial, Extended) (Continued)
PIC16LF1933
PIC16F1933
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D017
—
130
170
A
—
190
220
A
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode}
D017
—
150
200
A
—
210
270
A
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode (Note 5)}
—
270
330
A
5.0
D018
—
0.8
1.1
mA
1.8 FOSC = 8 MHz
—
1.3
1.7
mA
3.0 ^{HFINTOSC mode}
D018
—
0.9
1.2
mA
1.8 FOSC = 8 MHz
—
1.4
1.9
mA
3.0 ^{HFINTOSC mode (Note 5)}
—
1.6
2.2
mA
5.0
D019
—
1.3
1.8
mA
1.8 FOSC = 16 MHz
—
2.0
2.5
mA
3.0 ^{HFINTOSC mode}
D019
—
1.4
2.0
mA
1.8 FOSC = 16 MHz
—
2.2
2.8
mA
3.0 ^{HFINTOSC mode (Note 5)}
—
2.4
3.0
mA
5.0
D020
—
TBD TBD
mA
—
TBD TBD
mA
3.0 FOSC = 32 MHz
3.6 ^{HFINTOSC mode}
D020
—
TBD TBD
mA
—
TBD TBD
mA
3.0 FOSC = 32 MHz
5.0 ^{HFINTOSC mode}
D021
—
300
450
A
—
500
700
A
1.8 FOSC = 4 MHz
3.0 ^{EXTRC mode (Note 3)}
D021
—
350
600
A
—
550
900
A
1.8 FOSC = 4 MHz
3.0 ^{EXTRC mode (Note 3, Note 5)}
—
620 1000
A
5.0
D022
—
3.4
—
mA
3.0 FOSC = 32 MHz
—
4.2
—
mA
3.6 ^{HS Oscillator mode (Note 6)}
D022
—
3.6
—
mA
3.0 FOSC = 32 MHz
—
3.9
—
mA
5.0 ^{HS Oscillator mode (Note 5, Note 6)}
Legend:
Note 1:
2:
3:
4:
5:
6:
TBD = To Be Determined
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
FVR and BOR are disabled.
0.1 F capacitor on VCAP (RA0).
8 MHz crystal oscillator with 4x PLL enabled.
DS41575A-page 374
Preliminary
 2011 Microchip Technology Inc.