English
Language : 

PIC16F1933_11 Datasheet, PDF (372/430 Pages) Microchip Technology – 28-Pin Flash-Based, 8-Bit CMOS Microcontrollers LCD Driver and nanoWatt XLP Technology
PIC16(L)F1933
30.2 DC Characteristics: PIC16(L)F1933-I/E (Industrial, Extended) (Continued)
PIC16LF1933
PIC16F1933
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
D010
D010A
D010A
D011
D011
D012
D012
Legend:
Note 1:
2:
3:
4:
5:
6:
—
23
63
A
1.8 FOSC = 32 kHz
—
28
74
A
3.0 LP Oscillator mode (Note 4, Note 5),
—
33
79
A
5.0 -40°C  TA  +85°C
—
10
18
A
1.8 FOSC = 32 kHz
—
15
20
A
3.0 LP Oscillator mode (Note 4)
-40°C  TA  +125°C
—
24
79
A
1.8 FOSC = 32 kHz
—
30
93
A
3.0 LP Oscillator mode (Note 4, Note 5)
—
35
99
A
5.0 -40°C  TA  +125°C
—
140
180
A
—
200
300
A
1.8 FOSC = 1 MHz
3.0 XT Oscillator mode
—
140
200
A
—
210
350
A
1.8 FOSC = 1 MHz
3.0 XT Oscillator mode (Note 5)
—
350
470
A
5.0
—
300
400
A
—
500
700
A
1.8 FOSC = 4 MHz
3.0 XT Oscillator mode
—
320
550
A
—
570
800
A
1.8 FOSC = 4 MHz
3.0 XT Oscillator mode (Note 5)
—
700
960
A
5.0
TBD = To Be Determined
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
FVR and BOR are disabled.
0.1 F capacitor on VCAP (RA0).
8 MHz crystal oscillator with 4x PLL enabled.
DS41575A-page 372
Preliminary
 2011 Microchip Technology Inc.