PIC16F1933_11 Datasheet, PDF (177/430 Pages) Microchip Technology – 28-Pin Flash-Based, 8-Bit CMOS Microcontrollers LCD Driver and nanoWatt XLP Technology

PIC16(L)F1933
21.0 TIMER1 MODULE WITH GATE
CONTROL
The Timer1 module is a 16-bit timer/counter with the
following features:
• 16-bit timer/counter register pair (TMR1H:TMR1L)
• Programmable internal or external clock source
• 2-bit prescaler
• Dedicated 32 kHz oscillator circuit
• Optionally synchronized comparator out
• Multiple Timer1 gate (count enable) sources
• Interrupt on overflow
• Wake-up on overflow (external clock,
Asynchronous mode only)
• Time base for the Capture/Compare function
• Special Event Trigger (with CCP/ECCP)
• Selectable Gate Source Polarity
• Gate Toggle mode
• Gate Single-pulse mode
• Gate Value Status
• Gate Event Interrupt
Figure 21-1 is a block diagram of the Timer1 module.
FIGURE 21-1:
TIMER1 BLOCK DIAGRAM
T1GSS<1:0>
T1G
00
T1GSPM
From Timer0
Overflow
01
Comparator 1
SYNCC1OUT
10
Comparator 2
11
SYNCC2OUT
T1GPOL
T1G_IN
TMR1ON
T1GTM
DQ
CK ^Q
R
Set flag bit
TMR1IF on
Overflow
TMR1⁽²⁾
TMR1H
TMR1L
0
Single Pulse
1
Acq. Control
T1GGO/DONE
0
T1GVAL _{D Q}
1
Q1 EN
Interrupt
det
Data Bus
RD
T1GCON
Set
TMR1GIF
EN
QD
T1CLK
TMR1ON
0
TMR1GE
To Comparator Module
Synchronized
clock input
T1OSO
T1OSI
T1OSCEN
T1CKI
OUT
T1OSC
EN
(1)
TMR1CS<1:0>
Cap. Sensing
Oscillator ¹¹
1
10
0
FOSC
Internal ⁰¹
Clock
FOSC/4
Internal ⁰⁰
Clock
1
T1SYNC
Prescaler
1, 2, 4, 8
2
T1CKPS<1:0>
Synchronize⁽³⁾
det
FOSC/2
Internal
Clock
Sleep input
To LCD and Clock Switching Modules
Note 1: ST Buffer is high speed type when using T1CKI.
2: Timer1 register increments on rising edge.
3: Synchronize does not operate while in Sleep.
 2011 Microchip Technology Inc.
Preliminary
DS41575A-page 177