PIC18F66K22-I Datasheet, PDF (352/550 Pages) Microchip Technology – PIC18F87K22 Family Data Sheet

PIC18F87K22 FAMILY
23.2 A/D Registers
23.2.1 A/D CONTROL REGISTERS
REGISTER 23-1: ADCON0: A/D CONTROL REGISTER 0
U-0
—
bit 7
R/W-0
CHS4
R/W-0
CHS3
R/W-0
CHS2
R/W-0
CHS1
R/W-0
CHS0
R/W-0
GO/DONE
R/W-0
ADON
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
bit 6-2
bit 1
bit 0
Unimplemented: Read as ‘0’
CHS<4:0>: Analog Channel Select bits
00000 = Channel 00 (AN0)
10000 = Channel 16 (AN16)
00001 = Channel 01 (AN1)
10001 = Channel 17 (AN17)
00010 = Channel 02 (AN2)
10010 = Channel 18 (AN18)
00011 = Channel 03 (AN3)
10011 = Channel 19 (AN19)
00100 = Channel 04 (AN4)
10100 = Channel 20 (AN20)^(1,2)
00101 = Channel 05 (AN5)
10101 = Channel 21 (AN21)^(1,2)
00110 = Channel 06 (AN6)
10110 = Channel 22 (AN22)^(1,2)
00111 = Channel 07 (AN7)
10111 = Channel 23 (AN23)^(1,2)
01000 = Channel 08 (AN8)
11000 = (Reserved)⁽²⁾
01001 = Channel 09 (AN9)
11001 = (Reserved)⁽²⁾
01010 = Channel 10 (AN10
11010 = (Reserved)⁽²⁾
01011 = Channel 11 (AN11)
11011 = (Reserved)⁽²⁾
01100 = Channel 12 (AN12)^(1,2) 11100 = Channel 28 (Reserved CTMU)
01101 = Channel 13 (AN13)^(1,20) 11101 = Channel 29 (Internal temperature diode)
01110 = Channel 14 (AN14)^(1,2) 11110 = Channel 30 (VDDCORE)
01111 = Channel 15 (AN15)^(1,2) 11111 = Channel 31 (v1.024V band gap)
GO/DONE: A/D Conversion Status bit
1 = A/D (or calibration) cycle in progress. Setting this bit starts an A/D conversion cycle. The bit is
cleared automatically by hardware when the A/D conversion is completed.
0 = A/D conversion has completed or is not in progress
ADON: A/D On bit
1 = A/D Converter is operating
0 = A/D conversion module is shut off and consuming no operating current
Note 1: These channels are not implemented on 64-pin devices.
2: Performing a conversion on unimplemented channels will return random values.
DS39960D-page 352
 2009-2011 Microchip Technology Inc.