PIC16F631_08 Datasheet, PDF (260/306 Pages) Microchip Technology – 20-Pin Flash-Based, 8-Bit CMOS Microcontrollers with nanoWatt Technology

PIC16F631/677/685/687/689/690
TABLE 1:
A/D CONVERSION
REQUIREMENTS (SLEEP
MODE)
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C ≤ TA ≤ +125°C
Param
No.
Sym.
Characteristic
130*
TAD A/D Internal RC
Oscillator Period
131
132*
TCNV
TACQ
Conversion Time
(not including
Acquisition Time)⁽¹⁾
Acquisition Time
Min.
3.0*
2.0*
—
(2)
Typ†
6.0
4.0
11
11.5
Max. Units
Conditions
ADCS<1:0> = 11 (RC mode)
9.0* μs At VDD = 2.5V
6.0* μs At VDD = 5.0V
—
TAD
— μs
5*
—
— μs The minimum time is the amplifier
settling time. This may be used if
the “new” input voltage has not
changed by more than 1 LSb (i.e.,
4.1 mV @ 4.096V) from the last
sampled voltage (as stored on
CHOLD).
134
TGO Q4 to A/D Clock
Start
— TOSC/2 + TCY —
— If the A/D clock source is selected
as RC, a time of TCY is added
before the A/D clock starts. This
allows the SLEEP instruction to be
executed.
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: ADRES register may be read on the following TCY cycle.
2: See Table 9-1 for minimum conditions.
DS41262E-page 258
© 2008 Microchip Technology Inc.