PIC16F610 Datasheet, PDF(22/180 Page) Microchip Technology – 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PIC16F610 Datasheet, PDF (22/180 Pages) Microchip Technology – 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers

◁

PIC16F610/616/16HV610/616

2.2.2.5 PIR1 Register

The PIR1 register contains the peripheral interrupt flag

bits, as shown in Register 2-5.

Note:

Interrupt flag bits are set when an interrupt

condition occurs, regardless of the state of

its corresponding enable bit or the global

enable bit, GIE of the INTCON register. User

software should ensure the appropriate

interrupt flag bits are clear prior to enabling

an interrupt.

U-0

bit 7

R/W-0

ADIF(1)

R/W-0

CCP1IF(1)

R/W-0

C2IF

R/W-0

C1IF

U-0

R/W-0

TMR2IF(1)

R/W-0

TMR1IF

bit 0

Legend:

R = Readable bit

-n = Value at POR

W = Writable bit

â1â = Bit is set

U = Unimplemented bit, read as â0â

â0â = Bit is cleared

x = Bit is unknown

bit 7

Unimplemented: Read as â0â

bit 6

ADIF: A/D Interrupt Flag bit(1)

1 = A/D conversion complete

0 = A/D conversion has not completed or has not been started

bit 5

CCP1IF: CCP1 Interrupt Flag bit(1)

Capture mode:

1 = A TMR1 register capture occurred (must be cleared in software)

0 = No TMR1 register capture occurred

Compare mode:

1 = A TMR1 register compare match occurred (must be cleared in software)

0 = No TMR1 register compare match occurred

PWM mode:

Unused in this mode

bit 4

C2IF: Comparator C2 Interrupt Flag bit

1 = Comparator C2 output has changed (must be cleared in software)

0 = Comparator C2 output has not changed

bit 3

C1IF: Comparator C1 Interrupt Flag bit

1 = Comparator C1 output has changed (must be cleared in software)

0 = Comparator C1 output has not changed

bit 2

Unimplemented: Read as â0â

bit 1

TMR2IF: Timer2 to PR2 Match Interrupt Flag bit(1)

1 = Timer2 to PR2 match occurred (must be cleared in software)

0 = Timer2 to PR2 match has not occurred

bit 0

TMR1IF: Timer1 Overflow Interrupt Flag bit

1 = Timer1 register overflowed (must be cleared in software)

0 = Timer1 has not overflowed

Note 1: PIC16F616/16HV616 only. PIC16F610/16HV610 unimplemented, read as â0â.

DS41288C-page 20

Preliminary

▷