|
DG-IRMCK203 Datasheet, PDF (32/67 Pages) International Rectifier – Application Developer’s Guide | |||
|
◁ |
IRMCK203 Application Developerâs Guide
3.2.2 Starting and Stopping the Motor
To start or stop the motor in standalone mode, the user simply drives the Start/Stop signal. Section 2.4.1 describes
the required I/Os for Standalone mode operation.
3.2.3 Fault Processing
When the IRMCK203 detects a fault condition, it disables PWM and asserts the âFaultâ signal. In standalone mode,
the user clears the fault condition using the âFltClrâ signal. Fault processing is otherwise identical to that described
Section 2.6
This document is the property of International Rectifier and may not be copied or distributed without expressed consent.
32
|
▷ |