HMP8170 Datasheet, PDF (25/33 Pages) Intersil Corporation – NTSC/PAL Video Encoder

HMP8170, HMP8171, HMP8172, HMP8173
Absolute Maximum Ratings
Supply Voltage (V_{AA to GND)} . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0V
All Signal Pins . . . . . . . . . . . . . . . . . . . . . (GND – 0.5V) to (V_AA + 0.5V)
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Class 2
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 70^oC
Thermal Information
Thermal Resistance (Typical, Note 4)
θ_JA ^oC/W
PQFP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .150^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Vapor Phase Soldering, 1 Minute . . . . . . . . . . . . . . . . . . . . . .220^oC
(PQFP - Lead Tips Only)
CAUTION: Stresses above those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operation section of this specification is not implied.
NOTE:
4. θ_JA is measured with the component mounted on an evaluation printed circuit board in free air. Dissipation rating assumes that the device is
mounted with all its leads soldered to the PCB.
Electrical Specifications V_AA = +5V ±5%, RSET = 133Ω, VREF Unconnected, T_A = 25^oC, Unless Otherwise Specified
PARAMETER
TEST CONDITION
DC PARAMETERS, DIGITAL INPUTS EXCEPT CLK2, SDA, SCL
Input Logic Low Voltage, V_IL
Input Logic High Voltage, V_IH
Input Logic Low Current, I_IL
Input Logic High Current, I_IH
Input Capacitance, C_IN
DC PARAMETERS, CLK2 INPUT
V_IN = 0.0V
V_IN = V_AA
Input Logic Low Voltage, V_IL
Input Logic High Voltage, V_IH
Input Logic Low Current, I_IL
Input Logic High Current, I_IH
Input Capacitance, C_IN
DC PARAMETERS, SDA AND SCL INPUTS
V_IN = 0.0V
V_IN = V_AA
Input Logic Low Voltage, V_IL
Input Logic High Voltage, V_IH
Input Current, I_I
V_IN = 0.0V – V_AA
Input Capacitance, C_IN
DC PARAMETERS, DIGITAL OUTPUTS, EXCEPT SDA
Output Logic Low Voltage, V_OL
Output Logic High Voltage, V_OH
Output Capacitance, C_OUT
DC PARAMETERS, SDA OUTPUT
I_OL = 2mA
I_OH = -2mA
Output Logic Low Voltage, V_OL
Output Capacitance, C_OUT
DC PARAMETERS, ANALOG OUTPUTS
I_OL = 3mA
DAC Resolution
Integral Nonlinearity, INL
Differential Nonlinearity, DNL
Output Current
Output Impedance
Output Capacitance
Output Compliance Range
I_OUT = 0mA
I_OUT = 34mA
I_OUT = 0mA, CLK = 13.5MHz
MIN
TYP
MAX UNITS
-
-
0.8
V
2.0
-
-
V
-
-
-10
µA
-
-
10
µA
-
8
-
pF
-
-
0.3 x V_AA V
0.7 x V_AA
-
-
V
-
-
-10
µA
-
-
10
µA
-
8
-
pF
-
-
0.3 x V_AA V
0.7 x V_AA
-
-
V
-
-
± 10
µA
-
8
-
pF
-
-
0.4
V
2.4
-
-
V
-
8
-
pF
-
-
0.4
V
-
8
-
pF
-
10
-
Bits
-
0.5
±2
LSB
-
0.5
±1
LSB
-
-
34.8
mA
-
2M
-
Ω
-
300K
-
Ω
-
15
-
pF
0
-
1.4
V
25