DT28F160S570 Datasheet, PDF (39/51 Pages) Intel Corporation – 5 VOLT FlashFile™ MEMORY

E
28F160S5/28F320S5
6.0 ELECTRICAL SPECIFICATIONS
6.1 Absolute Maximum Ratings
NOTICE: This datasheet contains preliminary information
on new products in production. The specifications are
subject to change without notice. Verify with your local
Intel Sales office that you have the latest datasheet before
finalizing a design.
Temperature under Bias
Commercial ............................... 0 °C to +70 °C
Extended .............................. –40 °C to +85 °C
Storage Temperature................. –65 °C to +125 °C
Voltage On Any Pin
(except VCC and VPP )
.................................. –0.5 V to + VCC +0.5 V⁽¹⁾
VCC Supply Voltage .......... –0.2 V to + VCC+0.5 V⁽¹⁾
VPP Update Voltage during
Block Erase, Flash Write, and
Lock-Bit Configuration ......... –0.2 V to +7.0 V⁽²⁾
Output Short Circuit Current.....................100 mA⁽³⁾
*WARNING: Stressing the device beyond the “Absolute
Maximum Ratings” may cause permanent damage. These
are stress ratings only. Operation beyond the “Operating
Conditions” is not recommended and extended exposure
beyond the “Operating Conditions” may affect device
reliability.
NOTES:
1. All specified voltages are with respect to GND. Minimum DC voltage is –0.5 V on input/output pins and –0.2 V on VCC and
VPP pins. During transitions, this level may undershoot to –2.0 V for periods <20 ns. Maximum DC voltage on input/output
pins and VCC is VCC +0.5 V which, during transitions, may overshoot to VCC +2.0 V for periods <20 ns.
2. Maximum DC voltage on V_PP may overshoot to +7.0 V for periods <20 ns.
3. Output shorted for no more than one second. No more than one output shorted at a time.
4. Operating temperature is for extended product defined by this specification.
6.2 Operating Conditions
Symbol
Table 17. Temperature and VCC Operating Conditions ⁽¹⁾
Parameter
Notes Min Max Unit
Test Condition
TA
Operating Temperature
Commercial
Extended
0
+70
–40 +85
°C Ambient Temperature
VCC1
VCC Supply Voltage (5 V ± 5%)
4.75 5.25
V
VCC2
VCC Supply Voltage (5 V ± 10%)
4.50 5.50
V
NOTES:
1. Device operations in the VCC voltage ranges not covered in the table produce spurious results and should not be
attempted.
PRELIMINARY
39