80960JD Datasheet, PDF (29/61 Pages) Intel Corporation – EMBEDDED 32-BIT MICROPROCESSOR

A
80960JD
Symbol
I_LI1
I_LI2
I_LO
I_CC Active
(Power Supply)
I_CC Active
(Thermal)
I_CC Test
(Power modes)
Table 14. 80960JD I_CC Characteristics
Parameter
Input Leakage Current for
each pin except TCK, TDI,
TRST and TMS
Input Leakage Current for
TCK, TDI, TRST and TMS
Output Leakage Current
80960JD-50
80960JD-40
80960JD-33
80960JD-50
80960JD-40
80960JD-33
Reset mode
80960JD-50
80960JD-40
80960JD-33
Typ
-140
525
430
365
Max
±1
-250
±1
640
530
450
510
430
370
Units
Notes
µA 0 ≤ V_IN ≤ V_CC
µA V_IN = 0.45V (1)
µA 0.4 ≤ V_OUT ≤ V_CC
mA (2,3)
(2,3)
(2,3)
mA (2,4)
(2,4)
(2,4)
mA ⁽⁵⁾
(5)
(5)
Halt mode
80960JD-50
80960JD-40
80960JD-33
48
(5)
41
(5)
36
(5)
ONCE mode
10
(5)
NOTES:
1. These pins have internal pullup devices. Typical leakage current is not tested.
2. Measured with device operating and outputs loaded to the test condition in Figure 8, AC Test Load (pg.
33).
3. I_CC Active (Power Supply) value is provided for selecting your system’s power supply. It is measured
using one of the worst case instruction mixes with V_CC = 5.25V. This parameter is characterized but not
tested.
4. I_CC Active (Thermal) value is provided for your system’s thermal management. Typical I_CC is measured
with V_CC = 5.0V and temperature = 25° C. This parameter is characterized but not tested.
5. I_CC Test (Power modes) refers to the I_CC values that are tested when the 80960JD is in Reset mode,
Halt mode or ONCE mode with V_CC = 5.25V.
PRELIMINARY
25