TC1167 Datasheet, PDF (85/127 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1167
Electrical Parameters
5.1.3 Absolute Maximum Ratings
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > related V_DD or V_IN < V_SS) the
voltage on the related V_DD pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Table 7
Parameter
Absolute Maximum Rating Parameters
Symbol
Values
Min. Typ. Max.
Ambient temperature
T_A SR -40 –
Storage temperature
T_ST SR -65 –
Junction temperature
T_J SR -40 –
Voltage at 1.5 V power supply V_DD
––
pins with respect to V_SS1)
SR
Voltage at 3.3 V power supply V_DDP SR – –
pins with respect to V_SS2)
Voltage at 5 V power supply V_DDM SR – –
pins with respect to V_SS
Voltage on any Class A input V_IN SR -0.5 –
pin and dedicated input pins
with respect to V_SS
Voltage on any Class D
V_AIN
-0.5 –
analog input pin with respect V_AREFx
to V_AGND
SR
Voltage on any Class D
V_AINF
-0.5 –
analog input pin with respect V_FAREF
to V_SSAF, if the FADC is
SR
switched through to the pin.
1) Applicable for V_DD, V_DDOSC, V_DDPLL, and V_DDAF.
2) Applicable for V_DDP, V_DDFL3, and V_DDMF.
85
150
150
2.25
3.75
5.5
V_DDP + 0.5
or max. 3.7
V_DDM + 0.5
V_DDM + 0.5
Unit Note /
Test Con
dition
°C Under bias
°C –
°C Under bias
V–
V–
V–
V Whatever
is lower
V–
V–
Data Sheet
80
V1.3, 2009-10