TC1167 Datasheet, PDF (38/127 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1167
Introduction
Features
• Master and Slave Mode operation
– Full-duplex or half-duplex operation
– Automatic pad control possible
• Flexible data format
– Programmable number of data bits: 2 to 16 bits
– Programmable shift direction: LSB or MSB shift first
– Programmable clock polarity: Idle low or idle high state for the shift clock
– Programmable clock/data phase: Data shift with leading or trailing edge of the shift
clock
• Baud rate generation
– Master Mode: 40.0 Mbit/s to 610.36 bit/s (@ 80 MHz module clock)
– Slave Mode: 20 Mbit/s to 610.36 bit/s (@ 80 MHz module clock)
• Interrupt generation
– On a transmitter empty condition
– On a receiver full condition
– On an error condition (receive, phase, baud rate, transmit error)
• Flexible SSC pin configuration
• Seven slave select inputs SLSI[7:1] in Slave Mode
• Eight programmable slave select outputs SLSO in Master Mode
– Automatic SLSO generation with programmable timing
– Programmable active level and enable control
2.4.3 Micro Second Channel Interface
The Micro Second Channel (MSC) interface provides serial communication links
typically used to connect power switches or other peripheral devices. The serial
communication link includes a fast synchronous downstream channel and a slow
asynchronous upstream channel. Figure 7 shows a global view of the interface signals
of the MSC interface.
Data Sheet
34
V1.3, 2009-10