|
TLE7263E Datasheet, PDF (45/63 Pages) Infineon Technologies AG – Integrated HS-CAN, LIN, LDO and HS Switch System Basis Chip | |||
|
◁ |
TLE 7263E
Electrical Characteristics
Table 13 Electrical Characteristics (contâd)
VS = 13.5 V; ICC1 = 1 mA; 4.9 V < VCC1/2 < 5.1 V; SBC Active Mode; all outputs open;
-40 °C < Tj < 150 °C (max. 125 °C for CAN circuit characteristics); all voltages with
respect to ground; positive current defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
Min. Typ. Max.
Transmitter delay
symmetry
tsym,T
-2
â
2
µs tsym,T = td(L),T - td(H),T
(LIN Spec 1.3;
Line 10.3.9)
Wake-up delay time
twake
30
â
TxD dominant time out ttimeout 6
TxD dominant time out ttorec
â
recovery time
100 150 µs Tj ⤠125 °C
â
170 µs Tj ⤠150 °C
12
20 ms VTxD = 0 V
10 â
µs VTxD = 5 V
Not subject to production
test. Specified by design
Transfer Rate 20 kBit/s; 1 µs < Ï = RL à Cbus < 5 µs
Duty cycle D1
D1
0.396 â
â
Duty cycle D2
D2
â
â
0.581
Data Sheet
45
duty cycle 1:
THRec(max) =
0.744 Ã VS;
THDom(max) =
0.581 Ã VS;
VS = 7.0 ⦠18 V;
tbit = 50 µs;
D1 = tbus_rec(min)/[2 tbit]
(LIN Spec 2.0;
line 3.3.1)
duty cycle 2:
THRec(min) =
0.422 Ã VS;
THDom(min) =
0.284 Ã VS;
VS = 7.6 ⦠18 V;
tbit = 50 µs;
D2 = tbus_rec(max)/[2 tbit]
(LIN Spec 2.0;
line 3.3.2)
Rev. 1.51, 2007-06-22
|
▷ |