TLE7263E Datasheet, PDF (33/63 Pages) Infineon Technologies AG – Integrated HS-CAN, LIN, LDO and HS Switch System Basis Chip

TLE 7263E
Electrical Characteristics
Table 13 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC1 = 1 mA; 4.9 V < V_CC1/2 < 5.1 V; SBC Active Mode; all outputs open;
-40 °C < T_j < 150 °C (max. 125 °C for CAN circuit characteristics); all voltages with
respect to ground; positive current defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
Min. Typ. Max.
Current consumption I_Q
–
240 330 µA sleep mode, during
HS-On phase;
T_j = 85°C; V_CC2 “off”
Voltage Regulator; Pin V_CC1/2
Output voltage
V_CC1/2 4.9 5.0
Line regulation
∆V_CC1/2 –
–
Load regulation
∆V_CC1/2 –
–
Power supply ripple
PSRR –
40
rejection
Output current limit
I_CC1/2max 200 –
Drop voltage
V_DR
–
–
5.1 V
1 mA<I_CC1/2<100 mA;
6 V < V_S < 20 V
20 mV 6 V < V_S < 16 V;
I_CC = 1 mA
50 mV 5 mA<I_CC1/2<100 mA;
V_S = 6 V
–
dB V_r = 1 Vpp;
f_r = 100 Hz;
specified by design;
not subject to
production test
500 mA V_CC1/2 = 4.5 V;
power transistor
thermally monitored;
150 mA for external
load
0.5 V
I_CC1/2 = 150 mA;
internal modules not
supplied;
4.5V < V_S < 5.4V
Data Sheet
33
Rev. 1.51, 2007-06-22