TLE7263E Datasheet, PDF (23/63 Pages) Infineon Technologies AG – Integrated HS-CAN, LIN, LDO and HS Switch System Basis Chip

TLE 7263E
Features
Table 6
General & Integrated Switch Configuration
Pos. General Configuration¹⁾
Integrated Switch Configuration²⁾
5
Reset Threshold (see Table : “Reset OUTHS “on” / “off”
Generator”, “0” = V_RT1 /
“1” = V_RT2)
6
Reset Delay (“0” = 5 ms / “1” = 0.5 ms) “reserved” / not used
7
LIN “Low Slope Mode” (10.4 kBaud) “reserved” / not used
8
MON1 Input Wake-Up Capability
“reserved” / not used
9
MON2 Input Wake-Up Capability
“reserved” / not used
10 MON3 Input Wake-Up Capability
“reserved” / not used
11 MON4 Input Wake-Up Capability
“reserved” / not used
12 Sense Input (SI) “on” / “off”
“reserved” / not used
13 “reserved” / not used
“reserved” / not used
1) “1” = ON (enable), “0” = OFF (disable)
2) “1” = ON, “0” = OFF
Table 7
Cyclic Sense / Wake & Window Watchdog Period Settings¹⁾
Pos. Cyclic Sense / Wake Configuration Window Watchdog Configuration
5
Cyclic Period Bit 0 (T0)
Watchdog Period Bit 0 (T0)
6
Cyclic Period Bit 1 (T1)
Watchdog Period Bit 1 (T1)
7
Cyclic Period Bit 2 (T2)
Watchdog Period Bit 2 (T2)
8
Cyclic Period Bit 3 (T3)
Watchdog Period Bit 3 (T3)
9
Cyclic Period Bit 4 (T4)
Watchdog Period Bit 4 (T4)
10 Cyclic Sense / Wake Selection
Watchdog Period Bit 5 (T5)
(“0” = Cyclic Sense / “1” = Cyclic Wake)
11 OUTHS On-Time Selection
(“0” = 500 µs / “1” = 100 µs)
“0” [mandatory]
12 Cyclic Wake Mode only:
“reserved” / not used
Select OUTHS “off” via STS / On-Time
(“0” = via STS / “1” = via HS On-Time)
13 Continuous Timer Mode (incl. WKO) “reserved” / not used
(“0” = “off” / “1” = “on” )
1) “1” = ON, “0” = OFF
Data Sheet
23
Rev. 1.51, 2007-06-22