TLE7263E Datasheet, PDF (36/63 Pages) Infineon Technologies AG – Integrated HS-CAN, LIN, LDO and HS Switch System Basis Chip

TLE 7263E
Electrical Characteristics
Table 13 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC1 = 1 mA; 4.9 V < V_CC1/2 < 5.1 V; SBC Active Mode; all outputs open;
-40 °C < T_j < 150 °C (max. 125 °C for CAN circuit characteristics); all voltages with
respect to ground; positive current defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
Min. Typ. Max.
Pull up current
I_PU,MON -30 -10 -3
µA V_MON = 3.8V
Pull down current
I_PD,MON 3
10
30 µA V_MON = 2V
MONx filter time
t_{MONx, f} 10
–
20 µs –
Input current
I_MONx
-2
–
2
µA V_MONx = 0 V;
V_MONx > 5V
High Side Output OUTHS
Static Drain-Source
ON-Resistance;
I_OUTH = -150 mA
R_{DSON HS} –
–
2.5 3.5 Ω T_j = 25 °C
–
6.0 Ω –
Active Zener voltage V_OUTHS –
V_S-45 –
V I_OUTHS = -0.15 A
Leakage current
I_QLHS
-10 –
–
µA V_OUTHS = 0 V
Switch ON delay time t_dONHS –
–
20 µs CSN high to OUTHS
Switch OFF delay time t_dOFFHS –
–
20 µs CSN high to OUTHS
Overcurrent shutdown I_SDHS -0.8 -0.4 -0.2 A –
threshold
Shutdown filter time
t_dSDHS 10
25
40 µs –
UV-Switch-ON voltage V_{UV ON} –
5.35 6.00 V V_S increasing
UV-Switch-OFF voltage V_{UV OFF} 4.50 4.85 –
V V_S decreasing
UV-ON/OFF-Hysteresis V_{UV HY} 0.1 0.2 –
V
V_{UV ON} - V_{UV OFF}
Cyclic sense period
t_{P CS}
–
16 to –
ms selectable via SPI
512
bits;
tolerance depending
on internal oscillator
Cyclic sense ON time
t_{CS on1}
t_{CS on2}
0.4 0.5
0.08 0.1
0.6 ms default SPI setting
0.12 ms SPI option
Data Sheet
36
Rev. 1.51, 2007-06-22