TLE7263E Datasheet, PDF (38/63 Pages) Infineon Technologies AG – Integrated HS-CAN, LIN, LDO and HS Switch System Basis Chip

TLE 7263E
Electrical Characteristics
Table 13 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC1 = 1 mA; 4.9 V < V_CC1/2 < 5.1 V; SBC Active Mode; all outputs open;
-40 °C < T_j < 150 °C (max. 125 °C for CAN circuit characteristics); all voltages with
respect to ground; positive current defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
Min. Typ. Max.
CAN Bus Receiver
Differential receiver
threshold voltage,
V_diff,d
–
recessive to dominant
edge
0.80 0.90 V
V_diff = V_CANH - V_CANL
“active mode”
Differential receiver
threshold voltage,
dominant to recessive
edge
V_diff,r
0.50 0.60 –
V
V_diff = V_CANH - V_CANL
“active mode”
Common Mode Range CMR -12 –
12 V –
Differential receiver
hysteresis
V_diff,hys –
110 –
mV “active mode”
CANH, CANL input
R_i
resistance
10 20 30 kΩ recessive state
Differential input
resistance
R_diff
20 40 60 kΩ recessive state
Wake-up Receiver
threshold voltage,
V_{diff, d}
–
recessive to dominant
edge
0.8 1.15 V “sleep/stop mode”
Wake-up Receiver
threshold voltage,
dominant to recessive
edge
V_{diff, r}
0.4 0.7 –
V “sleep/stop mode”
Wake-up Receiver
differential receiver
hysteresis
V_{diff, hys.} –
120 –
mV “sleep/stop mode”
Data Sheet
38
Rev. 1.51, 2007-06-22