TLE7263E Datasheet, PDF (37/63 Pages) Infineon Technologies AG – Integrated HS-CAN, LIN, LDO and HS Switch System Basis Chip

TLE 7263E
Electrical Characteristics
Table 13 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC1 = 1 mA; 4.9 V < V_CC1/2 < 5.1 V; SBC Active Mode; all outputs open;
-40 °C < T_j < 150 °C (max. 125 °C for CAN circuit characteristics); all voltages with
respect to ground; positive current defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
Min. Typ. Max.
Send to Sleep Input (STS)
H-input voltage
threshold
L-input voltage
threshold
Hysteresis of input
voltage
V_IH
V_IL
V_IHY
–
–
0.3 × –
V_CC1
0.8 –
0.7 × V –
V_CC1
–
V–
1.5 V –
Pull-down resistance at R_ISTS
pin STS
20 40
80 kΩ V_STS = 0.2 × V_CC1
STS pulse width
t_STS
Wake Event Output WKO
10 –
–
µs one oscillator period
HIGH level output
voltage
LOW level output
voltage
V_WKO,H
V_WKO,L
0.8 × –
V_CC1
–
–
CAN Transceiver Characteristics
Receiver Output RxD
–
V
0.2 × V
V_CC1
I_WKO = -1.6 mA
I_WKO = 1.6 mA
HIGH level output
current
I_RD,H
–
-4
-2
mA V_RD = 0.8 × V_CC1;
V_diff < 0.4 V¹⁾
LOW level output
current
I_RD,L
2
4
–
mA V_RD = 0.2 × V_CC1;
V_diff > 1 V¹⁾
Transmission Input TxD
HIGH level input voltage V_TD,H
threshold
TxD input hysteresis V_TD,hys
LOW level input voltage V_TD,L
threshold
TxD pull-up resistance R_TD
–
–
0.3 ×
V_CC1
10
0.5 ×
V_CC1
0.4
0.5 ×
V_CC1
20
0.7 × V
V_CC1
–
V
–
V
40 kΩ
recessive state
–
dominant state
–
Data Sheet
37
Rev. 1.51, 2007-06-22